Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Chicago, IL
Chimney cap and crown work in Chicago runs $450-$1,800 depending on whether we’re sealing a hairline crack or replacing a spalled crown on a bungalow belt stack. We’re Level Two Chimney Co., and we inspect every chimney in Chicago with a camera-down-the-flue Level 2 inspection before quoting any cap or crown work. Call (708) 234-1174 for a written estimate.
Our Chicago office coordinates dispatch across the city. Crews carry DuraFlex and Gelco cap inventory sized for the multi-flue stacks common in Bridgeport two-flats and Rogers Park bungalows, so most jobs finish in one visit.
Why Chicago Homes Are Different
Chicago’s bungalow belt holds roughly 80,000 brick bungalows built between 1910 and 1940, from Rogers Park down to Beverly. Nearly all retain original masonry chimneys designed for coal, later converted to gas without proper relining. That leaves oversized, unlined or improperly transitioned flues that draft poorly, accumulate corrosive condensation, and sit atop 80-plus years of freeze-thaw damage.
Lake Michigan moisture saturates brick chimneys, then Chicago’s roughly 100 sub-freezing days yearly drive repeated freeze-thaw cycles that spall crowns and crack clay liner sections faster than in drier inland markets. Prevailing westerly and northerly winds create negative-pressure downdraft on taller two- and three-flat buildings, a condition technicians in Naperville rarely see. In Bridgeport, Archer Heights, and Clearing, we regularly find original rectangular coal flues never relined for gas - a flex pipe simply runs up an open chase, letting cold air attack from outside while acidic condensate destroys from inside.
Our Main Chicago Services
Chicago homeowners call us most often for these three services:
Chimney Cleaning & Sweep in Chicago
We clean and sweep chimneys across Chicago’s bungalow belt and two-flat neighborhoods, using rotary brushes sized for oversized coal-era flues and camera verification to confirm creosote removal. Every sweep includes a Level 2 inspection with photo documentation under Haven Standard Clause 4. Chimney Cleaning & Sweep in Chicago covers our full sweep process for local housing stock.
Chimney Repair in Chicago
Our Chicago repair work addresses spalling brick, deteriorated mortar joints, and freeze-thaw damage specific to lake-moisture-saturated masonry. We document pre- and post-condition with photos and deliver a written scope and price before any repair begins. Chimney Repair in Chicago details our tuckpointing, crown rebuilding, and structural repair capabilities.
Fireplace Services in Chicago
We service factory-built and masonry fireplaces in Chicago homes, from gas insert troubleshooting in converted bungalow hearths to smoke chamber parging in original coal-era fireboxes. Every visit includes camera inspection and written documentation. Fireplace Services in Chicago covers installation, repair, and maintenance.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Chicago
Chimney cap and crown work in Chicago addresses the unique damage pattern of lake-moisture saturation followed by hard freeze-thaw cycling. We inspect crowns with cameras and moisture meters, then quote repair or replacement in writing before any work starts. Chimney Cap & Crown details our full capabilities.
Crown Repair
Signs you need it
Visible cracks wider than a credit card edge, pooling water after rain, or brick spalling directly below the crown indicate freeze-thaw damage requiring repair.
What it costs in Chicago
Crown repair in Chicago typically runs $450-$900 for crack sealing and resurfacing, or $1,200-$1,800 for partial rebuild when spalling extends below the crown line.
How we do it
We grind out cracked concrete to sound substrate, apply bonding agent, and pour new crown mix sloped 1/4 inch per foot with drip edge formed at the perimeter.
Cap Replacement
Signs you need it
Rust-through, missing mesh sides, or a cap that no longer seats squarely on the flue tile allows water and animal entry.
What it costs in Chicago
Single-flue cap replacement runs $180-$350 installed; multi-flue caps for Chicago two-flats range $400-$750 depending on screen height and material gauge.
How we do it
We measure flue dimensions with a tape and camera, fabricate or stock a stainless or galvanized cap with minimum 5-inch screen height, and fasten with masonry screws or compression fit.
What Chimney Cap & Crown Costs in Chicago
| Item | Typical range in Chicago |
|---|---|
| Crown crack repair / coating | $450 - $900 |
| Crown partial rebuild | $1,200 - $1,800 |
| Single-flue cap replacement | $180 - $350 |
| Multi-flue cap installation | $400 - $750 |
How long does a crown repair last in Chicago?
A properly sloped crown repair with quality mix lasts 15-25 years in Chicago’s climate, though lake-facing exposures may need inspection at 10 years. We warranty crown work under our 365-Day Done Right Promise and document condition annually if you schedule regular sweeps.
Can you match a cap to a multi-flue Chicago two-flat stack?
Yes, we measure each flue and fabricate or stock multi-flue caps with proper screen height and overhang for shared Chicago stacks. Most installations finish in one visit because we carry common two-flat configurations sized for 9×13 and 13×13 flue combinations.
Chimney Liner & Rebuild in Chicago
Chimney liner and rebuild work in Chicago centers on the bungalow belt’s legacy of unlined coal flues converted to gas without proper transition. We camera-scan every flue before quoting, then specify stainless or flexible liner systems from DuraFlex or Olympia Chimney sized to the appliance, not the oversized masonry chase. Chimney Liner & Rebuild covers our full liner and rebuild services.
Stainless Steel Liner
Signs you need it
Clay tile chunks in the firebox, visible gaps in liner joints on camera, or a gas appliance venting into an unlined coal flue require stainless relining.
What it costs in Chicago
Stainless steel liner installation in Chicago ranges $2,800-$4,500 for a single appliance, including insulation, top plate, and connector.
How we do it
We drop a camera to assess flue condition and sizing, then install an insulated 316Ti stainless liner with proper appliance connector and UL-listed top termination.
Partial Rebuild
Signs you need it
Leaning stack, separated courses above the roofline, or mortar erosion exposing flue tiles indicate structural failure requiring partial rebuild.
What it costs in Chicago
Partial rebuild of a Chicago bungalow stack above the roofline typically runs $3,500-$6,000 depending on scaffold needs and brick matching.
How we do it
We dismantle to sound masonry, salvage matching brick when possible, and rebuild with Type N mortar sloped to shed water, with new crown and cap installed before scaffold removal.
What Chimney Liner & Rebuild Costs in Chicago
| Item | Typical range in Chicago |
|---|---|
| Stainless steel liner (single appliance) | $2,800 - $4,500 |
| Flexible liner with insulation | $2,200 - $3,800 |
| Partial rebuild (above roofline) | $3,500 - $6,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Does every Chicago bungalow need a new liner?
No. We camera-inspect first and only recommend relining when we document failed clay tile, unlined gas venting, or code non-compliance. Many chimneys need only a sweep and cap upgrade; we show you the camera footage before quoting any liner work.
How long does a stainless liner last in Chicago?
Properly installed 316Ti stainless liners carry a lifetime warranty and typically exceed 20 years in Chicago’s freeze-thaw climate, outperforming clay tile which cracks from thermal shock and moisture expansion.
Brands We Service in Chicago
We stock caps, liners, and repair materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney through Haven’s buying network, with most common Chicago bungalow and two-flat sizes available for same-visit completion. our brands lists our full inventory.
Pricing for Chimney Cleaning in Chicago, IL
| Service | Typical range in Chicago |
|---|---|
| Level 2 chimney inspection with camera | $199 - $299 |
| Chimney sweep and cleaning | $199 - $349 |
| Crown crack repair / coating | $450 - $900 |
| Crown partial rebuild | $1,200 - $1,800 |
| Single-flue cap replacement | $180 - $350 |
| Multi-flue cap installation | $400 - $750 |
| Stainless steel liner (single appliance) | $2,800 - $4,500 |
| Flexible liner with insulation | $2,200 - $3,800 |
| Partial rebuild (above roofline) | $3,500 - $6,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Chicago jobs above typical range involve scaffold rental for tall two- and three-flat stacks, brick matching for vintage common brick, or multiple appliances requiring separate liner drops. Every price is written and agreed before work starts, with no add-ons without updated written approval.
Neighborhoods We Serve in Chicago
We sweep, inspect, and repair chimneys across Chicago’s bungalow belt and lakefront neighborhoods, with crews dispatched daily from our Chicago office. Most appointments schedule within a week; emergency camera inspections for suspected blockages or post-chimney-fire assessment are available next day.
- Bridgeport
- Archer Heights
- Clearing
- Rogers Park
- Beverly
Service Area - Cities Near Chicago
Our crews serve homeowners throughout the near-west and near-north suburbs, including Oak Park, IL, Elmwood Park, IL, Westchester, IL, and Evanston, IL. Scheduling and dispatch run from our Chicago office with local technicians assigned by territory.
Serving Chicago, IL - Our Local Coverage Area
We’re based in the Chicago area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Chicago
Chicago’s bungalow belt chimneys often need annual inspection due to unlined gas conversion and oversized flues that cool rapidly, promoting condensation and creosote buildup. We recommend yearly Level 2 camera inspection, with sweep frequency determined by what the camera shows, not a fixed calendar.
Structural chimney rebuilds and liner alterations in Chicago require permitting through the Department of Buildings; cap and crown repairs typically do not. We pull permits when required and include the cost in your written estimate, so there’s no surprise paperwork or inspection fee.
Standard Level 2 inspections in Chicago typically schedule within 5-7 business days; suspected chimney fires, carbon monoxide alarms, or severe weather damage move to next-day priority. Call (708) 234-1174 and we’ll confirm the first available slot that matches your urgency.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chicago Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."Clean, careful, put down sheeting, and the fireplace works properly for the first time since we moved in."
- Yvette S."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M.