Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Arlington Heights, IL
Chimney cleaning in Arlington Heights typically costs $189-$289 for a standard sweep with NFPA 211 Level 2 camera inspection, and most appointments are completed in 60-90 minutes. Level Two Chimney Co. has inspected and cleaned more than 38,000 chimneys since 2009, and every Arlington Heights job starts with a written price before work begins. Call (708) 234-1174 to schedule - estimates are free, and our Chicago office coordinates local crew dispatch.
Why Arlington Heights Homes Are Different
Arlington Heights filled out between the 1950s and 1970s with brick colonials, ranches, and split-levels whose masonry chimneys were originally sized and lined for oil-burning furnaces. When those furnaces were replaced by high-efficiency gas units venting through PVC sidewalls, thousands of original flues became “orphaned” - serving only a water heater or nothing at all. The chronic under-firing produces acidic condensate that dissolves clay tile liners from the inside out, a failure pattern hidden until water damage or a camera inspection exposes it.
The Chicago northwest suburban climate adds 40-60 freeze-thaw cycles each season, aggressively spalling mortar joints and cracking chimney crowns on these older brick stacks. Heavy fireplace use from October through late March - driven by genuine cold, not occasional ambiance - means third-stage creosote glazing is a realistic annual risk for homeowners who skip cleanings. The village’s postwar tract construction is now 50-70 years old, and the clay tile liner systems are at or past typical service life.
Our Main Arlington Heights Services
Arlington Heights homeowners call us most often for chimney cleaning and repair, plus fireplace maintenance before burning season.
Chimney Cleaning & Sweep in Arlington Heights
Our NFPA 211 Level 2 sweep includes a camera-scan of the full flue, smoke chamber, and firebox, with a documented photo record delivered after. We see heavy glazed creosote in Arlington Heights’s mid-century neighborhoods where fireplaces burn four to five months straight. Chimney Cleaning & Sweep in Arlington Heights
Chimney Repair in Arlington Heights
Crown cracks, spalling brick, and deteriorated mortar joints are standard findings here after decades of freeze-thaw cycling. We quote repointing, crown rebuilding, or partial rebuilds in writing before any work starts. Chimney Repair in Arlington Heights
Fireplace Services in Arlington Heights
Gas insert installs, firebox refractory panel replacement, and damper repairs for the village’s mix of original masonry fireplaces and retrofitted units. Every job gets the same written price and photo documentation. Fireplace Services in Arlington Heights
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Arlington Heights
Arlington Heights’s 50-70 year old masonry chimneys suffer crown cracking and cap failure at high rates due to aggressive freeze-thaw cycling and original construction with minimal crown overhang or reinforcement. A proper cap and crown repair stops water infiltration that spalls brick, rusts dampers, and destroys clay liners from the outside in - damage that accelerates dramatically once started. Chimney Cap & Crown work is among our most common calls in the village’s postwar neighborhoods.
Crown Repair
Signs you need it
Visible cracks in the concrete crown, water stains on the firebox walls, or pieces of crown material on the roof after winter.
What it costs in Arlington Heights
Crown repair typically runs $450-$850 depending on accessibility and the extent of cracking; full crown replacement when the concrete is too deteriorated to patch ranges $1,200-$2,100.
How we do it
We grind out cracked sections, apply a bonding agent, and pour new high-strength concrete with proper slope and drip edge, then document the finished profile with photos.
Cap Installation
Signs you need it
Rust stains down the chimney face, debris or animal nesting material in the firebox, or a missing or deteriorated existing cap.
What it costs in Arlington Heights
Standard stainless steel cap installation runs $285-$495; custom multi-flue caps or copper finishes range $650-$1,400 depending on flue count and dimensions.
How we do it
We measure each flue precisely, fabricate or source the cap through Haven’s buying network, and secure it with masonry anchors and a proper storm collar seal.
What Chimney Cap & Crown Costs in Arlington Heights
| Item | Typical range in Arlington Heights |
|---|---|
| Crown repair (crack sealing, partial rebuild) | $450 - $850 |
| Full crown replacement | $1,200 - $2,100 |
| Stainless steel cap installation | $285 - $495 |
| Custom/multi-flue cap | $650 - $1,400 |
Can a cracked chimney crown wait until spring in Arlington Heights?
No - freeze-thaw cycles from November through March actively expand cracks and drive water deeper into the masonry. We document crown condition with photos during inspection and quote repair before damage compounds.
How do I know if my cap fits properly?
A proper cap covers all flue openings with minimum 5-inch clearance, has a mesh screen to block animals and debris, and is secured against wind uplift. We measure and photograph the fit on every install under Haven Standard Clause 4.
Chimney Liner & Rebuild in Arlington Heights
Arlington Heights’s orphaned chimneys - large-diameter clay flues originally built for 150,000+ BTU oil furnaces now venting only a 40-gallon atmospheric water heater - suffer chronic under-firing that produces acidic condensate. This eats clay tile from the inside with zero exterior symptoms until the flue has already failed. Chimney Liner & Rebuild work often starts with a camera inspection that reveals hidden deterioration homeowners never suspected.
Stainless Steel Liner
Signs you need it
Clay tile fragments in the cleanout, visible gaps or cracks in the flue wall on camera inspection, or a water heater or boiler venting into an unlined or deteriorated flue.
What it costs in Arlington Heights
Stainless steel liner installation for a single appliance typically runs $2,800-$4,500; multi-appliance or tall chimney configurations range $4,200-$6,800.
How we do it
We drop a flexible 316Ti stainless steel liner, insulate with ceramic blanket to meet UL 1777, and terminate with a proper top plate and cap, documenting every joint and connection.
Partial Rebuild
Signs you need it
Leaning stack, extensive spalling brick above the roofline, or separated courses visible from the ground or documented in our photo record.
What it costs in Arlington Heights
Partial rebuild of the upper stack (above roofline) typically runs $3,500-$6,500; rebuilds requiring scaffold or extensive brick matching run higher.
How we do it
We dismantle to sound masonry, salvage matching brick where possible, and rebuild with proper bond, crown, and flashing integration, photographing each course.
What Chimney Liner & Rebuild Costs in Arlington Heights
| Item | Typical range in Arlington Heights |
|---|---|
| Stainless steel liner (single appliance) | $2,800 - $4,500 |
| Stainless steel liner (multi-appliance/tall) | $4,200 - $6,800 |
| Partial rebuild (above roofline) | $3,500 - $6,500 |
Do all Arlington Heights homes with oil-to-gas conversions need new liners?
Not automatically - we camera-inspect every flue to document actual condition. Many orphaned chimneys show hidden tile failure; others are sound. We show you the footage and quote only what the evidence supports.
How long does a stainless steel liner last?
Properly installed 316Ti stainless steel liners carry a lifetime warranty and typically outlast the appliance they serve. Our installs use DuraFlex or Olympia Chimney materials sourced through Haven’s buying network.
Brands We Service in Arlington Heights
We stock and install materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney through Haven’s buying network, keeping turnaround short and prices honest. Most caps, liners, and crown repair materials are available without extended wait times. our brands
Pricing for Chimney Cleaning in Arlington Heights, IL
| Service | Typical range in Arlington Heights |
|---|---|
| Standard chimney sweep with Level 2 inspection | $189 - $289 |
| Heavy creosote removal (Class III glazing) | $320 - $495 |
| Crown repair | $450 - $850 |
| Full crown replacement | $1,200 - $2,100 |
| Stainless steel cap installation | $285 - $495 |
| Custom/multi-flue cap | $650 - $1,400 |
| Stainless steel liner (single appliance) | $2,800 - $4,500 |
| Stainless steel liner (multi-appliance/tall) | $4,200 - $6,800 |
| Partial rebuild (above roofline) | $3,500 - $6,500 |
Prices in Arlington Heights run toward the higher end of these ranges when chimneys are very tall, access is limited by roof pitch or landscaping, or extensive creosote glazing requires mechanical removal. Every job is quoted in writing before work starts - Haven Standard Clause 1 - with no surprises after the tech arrives.
Neighborhoods We Serve in Arlington Heights
We work across Arlington Heights’s full residential footprint, from the postwar ranches and colonials near Rand Road to the older bungalows near the Metra station. Crews are dispatched from our Chicago office and typically arrive within the scheduled window.
- Scarsdale
- Hasbrook
- Shenandoah
- Ivy Hill
- Greenbrier
Service Area - Cities Near Arlington Heights
Our crews cover the full northwest suburban corridor, including Palatine, IL, Glenview, IL, Park Ridge, IL, and Highland Park, IL. Scheduling and dispatch are coordinated from our Chicago office with local technicians assigned to each area.
Serving Arlington Heights, IL - Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Arlington Heights
Most Arlington Heights appointments are available within 3-7 days during peak season (September-November) and within 1-3 days in off-peak months. We do not overbook - your scheduled window is held.
Exterior chimney repair above the roofline typically requires a permit from the Village of Arlington Heights Building Division; we handle permit submission as part of our scope when required. Interior sweeping and inspection do not.
NFPA 211 recommends annual inspection for all chimneys; sweeping frequency depends on use. Arlington Heights homeowners who burn wood four to five months annually should plan on annual sweeping to prevent Class III creosote buildup.
We scan the full flue interior with a camera, photograph the smoke chamber, firebox, and crown, and deliver a written report with findings and any recommended repairs priced separately. The photo record is archived under Haven Standard Clause 4.
Yes - we provide written scopes, proof of insurance, and technician license details on request. Our uniformed crews and documented work records satisfy most association requirements without follow-up calls.
You pay only the inspection fee and receive the full photo documentation for your records. We do not invent work - Haven Standard Clause 1 requires a written price before any repair begins, and “no action needed” is a valid outcome we document.
Yes - bring us any written estimate from another company and we’ll inspect, document our findings, and quote our own price with no obligation. This is standard practice, not a promotion.
Call (708) 234-1174 - a live person answers 24 hours a day. We’ll confirm your Arlington Heights address, describe the service you need, and book a window. Your written estimate arrives before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Heights Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."Clean, careful, put down sheeting, and the fireplace works properly for the first time since we moved in."
- Yvette S.